COPYRIGHT © 2004 MERIT INDUSTRIES, INC.

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES

Removal/Installation of Hard Drive -

FORCE Classic Countertop

Troubleshooting Information - Removal/Installation of Hard Drive -

FORCE Classic Countertop

Megatouch FORCE Technical Reference Manual

Hard Drive Removal

1. Turn off the game and unplug the game.

2. Unlock and open the lid.

3. Remove the screw securing the hard drive mounting plate to the game.  See Figure 1.

4. Remove the 4 screws and shoulder washers securing the hard drive to the mounting plate.

5.

 

Disconnect the 4-PIN power connector and the ribbon cable from the hard drive, then remove
the hard drive assembly from the game.

Hard Drive Installation

1. Connect the 4-PIN power connector and the ribbon cable to the new hard drive.

2. Place the new hard drive in the mounting plate and replace the 4 screws and shoulder washers

securing the drive to the plate.

3. Fasten the hard drive mounting plate to the game with the mounting screw.  See Figure 1.

4. Close and lock the lid.

5. Plug in and turn on the game.

FIGURE 1 – HARD DRIVE REMOVAL

SCREW SECURING
HARD DRIVE
MOUNTING PLATE TO
GAME