manuals/manuals_Support_Center_manuals_PM0431_07

Overview

The supplied USB pen can be used to import
or export ad screens, export books data, to
export or restore My Merit data, as well as
to add or export custom advertising screens
to the machine. It may also be used to clone
and export the machine configuration of
Boardwalk games and games running Force
or Ion 2007 software and above. If you will
be using the pen to transfer data to or from
a personal computer, the pen is supported
by Windows 98 Second Edition, 2000, ME,
XP, NT 4.0, CE 4.0, Mac OS 9.0 or higher,
and Linux 2.4.0. Windows 98 Second Edi-
tion and NT 4.0 users will need to download
the appropriate driver from
www.diskonkey.com; Mac OS 8.6 users will
need to download the appropriate driver from
www.apple.com. If you are using a differ-
ent operating system than those listed
above, consult the manufacturer’s Web site
for driver availability.

NOTE: Do not attempt to use another
type of USB pen to perform these op-
erations on your game. The USB pen
included in the kit is the only one ap-
proved by Merit Entertainment.

Megatouch USB Pen Kit

CONTENTS:

Connecting the USB Pen

To connect the USB Pen to the game:

Remove the USB pen cap.

Radion and Megatouch Champ games
ONLY

: Connect the supplied USB ex-

tension cable to the pen.

EVO games:

The USB port is located

at the back of the CPU section. Re-
move the cover plate with a
5/64” Allen wrench. See Figure 1. Skip
to step 6.

Elite Edge games:

Unlock and open the

rear housing to access the USB port.
See Figure 1. If your game has a bill
acceptor, remove the bill acceptor
magazine to access the connector.
Skip to step 6.

EVO Wallette games

: Slide the CPU

section to the right and remove the
cover plate with a 5/64” Allen wrench.
See Figure 1. Skip to step 6.

PM0431-07 MEGATOUCH USB PEN KIT

FIGURE 1 - EVO, ELITE EDGE, EVO WALLETTE CPU SECTION

QTY PART

NUMBER

DESCRIPTION

1 EC0120-XX

USB

PEN

EC0103-01

6” USB INTERFACE EXTENSION CABLE

USB PORT

DETAIL VIEW

OF COMMUNICATIONS

MODULE

2 MEGATOUCH USB PEN KIT PM0431-07

FIGURE 3 - USB PEN

Fusion Games:

Unlock and open the

bezel to access the electronics box. It
is not neccesary to open the box to
access the USB port. Skip to Step 6.

Money Shoot games:

Unlock and open

the bottom door to access the elec-
tronics box. It is not neccesary to open
the box to access the USB port. Skip
to Step 6.

Boardwalk games:

Unlock and open

the control panel (or open the rear door
if you have a Boardwalk converted
game) to access the electronics box.
It is not neccesary to open the box to
access the USB port. Skip to Step 6.

Unlock and open the appropriate door/
bezel/cover to access the motherboard
inside the game.

Using Figure 2, locate the free USB port
on the motherboard inside the game.

Plug the USB pen into the free USB port
(or into the extension cable for Radion
games). The LED (see Figure 3) on the
pen will flash when the device is first
connected, then pulse slowly after the
initial connection.

NOTE: For Fun Zone games with print-
ers, the printer will be connected to one
of the ports. When you want to use the
USB pen, you will have to unplug the
printer connector. Trace the cable to
identify which connector is the printer
connector. The printer connector will
come out of the electronics box and be
routed down towards the bottom of the
cabinet. With the printer disconnected,
you will receive a printer error mes-
sage. Once you enter setup and press
OK, the message will disappear. After
using the pen, plug the printer back
into the free USB port.

LOCATION
OF LED

FIGURE 2 - SIDE VIEW OF MOTHERBOARD

USB CONNECTORS

PM0431-07 MEGATOUCH USB PEN KIT

Exporting Books Data

NOTE: Exporting books data to the
USB pen will overwrite any existing
books data already on the USB pen.

Follow the steps in the

Connecting

the USB Pen

section to connect the

pen to the machine.

If the game has not been turned on yet,
turn it on and let it finish booting up.

Press the SETUP button inside the ma-
chine.

Touch the

System

button on the Main

Menu (see Figure 4).

Touch the

Data Transfer

button on the

System Menu (see Figure 5). If the pen
was properly connected, the game will
display a message indicating that a stor-
age device has been detected.

NOTE: If the NO STORAGE DEVICE
DETECTED appears, the USB pen was
not correctly connected to the machine.

Touch the

Export Books

button to

transfer Books data to the Pen. The
machine will display a message when
the data has been exported.

Touch the

button. The machine will

display a message stating the USB pen
can be disconnected from the game.

NOTE: Only disconnect the pen after
the LED has returned to the slow pulse,
NOT while it is flashing.

Books data is saved with a .dat extension.
After the data has been exported to the USB
pen, it can be opened with a word process-
ing program after connecting the pen to a
personal computer. The file will display ba-
sic game information such as the software
version, the game serial number, and date/
time information relating to books data. The
file will also show the current and lifetime
credit totals, as well as credit totals for each
game featured on the machine.

FIGURE 5 - DATA TRANSFER BUTTON ON

SYSTEM MENU

FIGURE 4 - SYSTEM BUTTON ON MAIN

FIGURE 8 - BACKUP/RESTORE BUTTON

4 MEGATOUCH USB PEN KIT PM0431-07

FIGURE 6 - PROMOTION BUTTON ON

MAIN MENU

FIGURE 7 - MY MERIT BUTTON ON

PROMOTION MENU

Restoring or Backing Up

My Merit Data

NOTE: Restoring My Merit data from
the USB pen will erase any My Merit
data currently on the machine. Con-
versely, backing up data onto the USB
pen will also overwrite any existing My
Merit data on the USB pen.

Follow the steps in the

Connecting

the USB Pen

section to connect the

pen to the machine.

If the game has not been turned on yet,
turn it on and let it finish booting up.

Press the

SETUP

button inside the ma-

chine.

Touch the

Promotion

button on the

Main Menu (see Figure 6).

Touch the

My Merit

button on the Pro-

motion Menu (see Figure 7).

Touch the

Backup/Restore

button on

the My Merit Menu (see Figure 8). If the
pen was properly connected, the game
will display a message indicating that a
storage device has been detected.

Touch the

Backup My Merit

Re-

store My Merit

button, depending on

which operation you want to perform.
The machine will display a message
when the data has been successfully
backed up or restored.

Touch the

button. The machine will

display a message stating that the USB
pen can be disconnected.

NOTE: Only disconnect the pen after
the LED has returned to a slow pulse,
NOT while it is flashing.

Cloning Machine Configuration

The USB pen allows operators to save the
machine configuration of select Merit games
and import the configuration to another
game. The feature is available to Ion and
FORCE games running 2007 software or
greater, as well as any Boardwalk game.

NOTE: The software and security key
must be of the same revision in order
to successfully clone the machine set-
tings.

The following settings can be saved and
transferred:

•

credit pricing

•

game pricing

•

game active/inactive data

•

Options screens settings (excluding
erotic settings*)

•

language setting

•

Coin-In table

•

Cash Settlement (excluding Books)

•

6 Star PIN

•

6 Star settings

•

security settings

•

volume setting

•

Setup Operator Key configuration/settings

•

Operator Ad Screens (must be turned on
after import)

•

Merit Money

•

Promo Credits

•

player key pricing*

•

Megatouch Nation upcharge*

•

AMI credits per song*

•

TouchTunes Timer*

not applicable to Boardwalk games

NOTE: Cloning the machine configu-
ration will overwrite any existing con-
figuration settings saved to your USB
pen.

Export Settings:

Follow the steps in the

Connecting

the USB Pen

section to connect the

pen to the machine.

If the game has not been turned on yet,
turn it on and let it finish booting up.

PM0431-07 MEGATOUCH USB PEN KIT

Press the SETUP button inside the ma-
chine.

Choose the

System

option on the Main

Menu (see Figure 4).

Select

Data Transfer

on the System

Menu (see Figure 5). If the pen was
properly connected, the game will dis-
play a message indicating that a stor-
age device has been detected.

NOTE: If the NO STORAGE DEVICE
DETECTED appears, the USB pen was
not correctly connected to the machine.

Choose the

Export Machine Configu-

ration

option to transfer configuration

data to the pen. The machine will dis-
play a message when the data has
been successfully exported and the pen
can safely be removed.

Import Settings:

Repeat the preceding Steps 1-5 on the
game to which you would like to import
your copied configuration.

On the Data Transfer screen, choose
the

Import Machine Configuration

option. A message will pop up warning
that existing settings will be overwrit-
ten. Select

YES

to confirm that you

want to continue.

When the import is complete, a mes-
sage will appear informing the opera-
tor that the data transfer was success-
ful.

Boardwalk games only:

The system

will restart to allow the new configura-
tion to take effect. Touch the

but-

ton. when prompted.

10. The machine will display a message

stating that the USB pen can be dis-
connected.

NOTE: Only disconnect the pen after
the LED has returned to the slow pulse,
NOT while it is flashing.

Adding Artwork for Custom Adver-
tising Screens to the Game

The USB pen can be used to transfer im-
ages to the machine so they are available
when using the Operator Ad Screens fea-
ture.

NOTE: Make sure only the graphics
files you want to import to the game
are on the USB pen.

Creating and Saving Images

Using a graphics program on a per-
sonal computer, create the artwork you
want to use in the custom advertising
screens. Keep the following in mind:

•

Files must be in .jpg or .pcx format.

•

Graphics must be 640 X 480 pixels in

size in order to appear as background
images. Any graphics that are not this
size will be saved as Clip Art images
instead. If a piece of clip art is larger
than 640 X 480, the entire image will
not display.

Plug the supplied USB Pen to a USB
port on your personal computer. The
LED (see Figure 3) inside the pen will
flash when the device is first connected,
then pulse slowly after the initial con-
nection. After the pen is connected, a
button may appear on the computer
desktop or system tray, depending on
your operating system.

Save the graphics files you created to
the USB pen.

Follow any necessary steps unplug-
ging the pen from the computer. If a
button appeared on your screen when
the pen was first connected, double-
click the button and follow the instruc-
tions before removing the pen. Some
operating systems will require the pen
to be ejected via on-screen user inter-
face before it can be safely discon-
nected. In other cases, the pen can
simply be unplugged.

Transferring Images to the Game for
Operator Ad Screen Use

Follow the steps in the

Connecting

the USB Pen

section to connect the

pen to the machine.

If the game has not been turned on yet,
turn it on and let it finish booting up.

Press the SETUP button inside the ma-
chine.

Touch the

Presentation

button on the

Main Menu (see Figure 9).

FIGURE 9 - PRESENTATION BUTTON ON

MAIN MENU

6 MEGATOUCH USB PEN KIT PM0431-07

FIGURE 11 - ADD/EDIT BILLBOARD

BUTTON

FIGURE 12 - ADD/DELETE IMPORTS

BUTTON

PM0431-07 MEGATOUCH USB PEN KIT

FIGURE 10 - OPERATOR AD SCREENS

BUTTON ON PRESENTATION MENU

Touch the

Operator Ad Screens

but-

ton on the Presentation Menu (see Fig-
ure 10).

10. Touch the

Add/Edit Billboard

button

on the Operator Ad Setup Screen (see
Figure 11).

11. Touch the

Add/Delete Imports

but-

ton on the next screen (see Figure 12).
Any images already uploaded onto the
machine will appear at the top of the
screen. A message will appear if no
images have been imported to machine
yet.

12. Touch the

Add More

or button. The

machine will search for the images you
copied to the USB pen.

13. Use the arrows to scroll through the

images stored on the pen. Select an
image you want to import to the ma-
chine, then touch the

Copy to Hard

Drive

button. Repeat for all images

you want to save on the machine, or
touch

Copy All to Hard Drive

to im-

port all images from the pen.

14. When you have imported all the desired

images from the pen, touch the

BACK

button to return to the previous screen.
You will now find your custom images
in the Background and/or Clip Art sec-
tions (depending on the size of each
image) and be able to create ad screens
using the imported images. Use the
green

buttons in the top right corner

of the screen for help with creating
screens.

Up to 120 additional screens can be added
to the game with the USB pen by download-
ing a program from our Web site
(www.meritind.com) in the

Support/Soft-

ware Downloads

section and following the

on-screen instructions.

NOTES:

__________________________________________________________________

_______________________________________________________________

________________________________________________________________

___________________________________________________________________

_______________________________________________________________

________________________________________________________________

__________________________________________________________________

_________________________________________________________________

______________________________________________________________

________________________________________________________________

___________________________________________________________________

__________________________________________________________________

_________________________________________________________________

_____________________________________________________________________

___________________________________________________________________

__________________________________________________________________

___________________________________________________________________

__________________________________________________________________

________________________________________________________________

_________________________________________________________________