manuals/manuals_manuals_Support_Center_7CEVO_7CPM0437_03_2520evo_2520recessed_2520mount

EVO Recessed Wall Mount Installation Instructions

PM0437-03

EVO RECESSED WALL MOUNT INSTALLATION INSTRUCTIONS

PAGE 1 OF 2

EVO Recessed Wall Mounting

CONTENTS:

QTY PART

DESCRIPTION

1 MW0804-01

BOTTOM

TOWER

COVER

HW4559-03

1/4 – 20 x. 50L PAN HEAD PHILLIPS MACHINE SCREW

PM0432-01

COIN EVO MOUNTING TEMPLATE

PM0433-01

BILL EVO MOUNTING TEMPLATE

NOTE: THIS INSTALLATION SHOULD ONLY BE PERFORMED BY A QUALIFIED SERVICE TECHNICIAN.

To mount the EVO recessed in a wall follow the instructions below.

WARNING: Before cutting the hole for the EVO, make sure that there are no electrical
wires, pipes or supporting structures behind the wall in the location where you are
mounting the game. To install the game using this mounting option, there must be a
MAXIMUM amount of 4 inches of clearance space behind the wall with the cutout and

the supporting structure behind the wall where the game will be secured (see Figures 5A and 5B).
This supporting structure must be capable of supporting the weight of the game (the EVO with
coin is 85 pounds, the EVO with bill acceptor only is 75 pounds) and it must not be a load-bearing
wall. Follow all appropriate precautions while performing this installation.

EVO with Coin:

If you are installing the EVO on the wall, a quick adjustment to the coin mech is

required for proper operation of the mech. Follow the instructions below to adjust the coin mech
before continuing with the installation instructions. For EVOs with bill acceptors only, continue
with the installation instructions on the reverse side of this sheet.

1. Unlock and open the cash tower.

2. Using Figure 1 as a guide, pull the bottom tabs on the coin mech out of the back notch on the coin

mech bracket and place the bottom tabs on the coin mech in the front notch on the bracket. The top
tabs should remain in the back notch.

3. Close and lock the cash tower and continue with Recessed Wall Mount Installation Instructions on the

reverse side of this sheet.

NOTE: If you change the mounting of the EVO to table or bar top mounting, you must return the
coin mech to its original position.

FIGURE 1 - PROFILE OF COIN MECH BRACKET

BAR

MOUNT

WALL

MOUNT

EVO Recessed Wall Mount Installation Instructions

PM0437-03

EVO RECESSED WALL MOUNT INSTALLATION INSTRUCTIONS

PAGE 2 OF 2

Recessed Wall Installation Instructions

1. Using the supplied template (PM0432-01 for EVOs with coin mechs and PM0433-01 for EVOs with

bill acceptors only) make the cutout in the wall for the EVO.

2. Carefully lay the game on the monitor side. If the lazy Susan on the bottom of the game has a single

screw in the middle, remove the screw and remove the lazy Susan. Then, remove the base from the
EVO by removing the 4 screws securing the base to the game.
If your lazy Susan does not have the screw in the middle, pull off the adhesive pad and use the large
access hole in the bottom of the lazy Susan to gain access to the four screws securing it to the game.
Remove the screws and remove the lazy Susan. Then, remove the base from the EVO by removing
the 4 screws securing the base to the game.

3. Attach the provided bottom plate to the cash tower using the 4 supplied screws as shown in Figures

2A and 2B.

4. Unlock and open the cash tower lock on the EVO. If you have a coin EVO, remove the coin box to

gain access to the mounting holes in the back of the cash tower.

5. Using the mounting holes in the cash tower as a guide, drill the 4 holes needed to mount the game on

the mounting surface.

6. Secure the EVO to the secondary wall. Make sure to use sufficient hardware to support the weight of

the game (75 pounds for EVOs with bill acceptors only and 85 pounds for EVOs with coin). See
Figures 2A and 2B.

7. If you have a coin EVO, replace the coin box.

8. Close and lock the cash tower.

CASH TOWER
ON EVO

MOUNTING
SURFACE ON
SECONDARY WALL

CUTOUT

IN WALL

ANCHORED

FASTENER
(4 REQUIRED)

SCREWS SECURING
BOTTOM PLATE ON
CASH TOWER
(4 PLACES)

4.00" MAXIMUM

SPACE